Hardware and embedded engineering

From first schematic to certified production hardware.

Non-recurring engineering for wireless devices, radar and sensing systems, and flight electronics. One senior-led team across RF, PCB, firmware, FPGA, certification, and the handoff to production.

  • Hardware through firmware
  • DO-178C and DO-254 experience
  • ITAR and EAR work
  • US-person staffing

Who this is for

Three situations where we can help.

CTOs, VPs of Engineering, and founders

You're building a connected product

You have a product to ship and need design depth you don't have in-house, or don't need full time. We take on the board, the firmware, and the certification path, or whichever part you need.

Aerospace and defense program managers

You have a program to deliver

Flight, radar, and sensor work comes with assurance standards and export controls. We scope the engineering and the handling of technical data together, before any of it is shared.

Fleet, utility, and industrial operators

You need a device that doesn't exist

Off-the-shelf trackers and gateways don't fit your assets, your environment, or your data. We design one that does, and can keep it running after it ships.

What we design

Devices that have to work where nobody can reach them.

Wireless, IoT, and M2M devices
Connected devices and gateways: cellular module integration, antennas, power budgets, and the firmware that keeps them reporting from the field.
GPS trackers
Asset and fleet trackers: positioning, low-power design, and cellular reporting built for long service life.
Synthetic aperture radar
Radar electronics and FPGA signal chains for synthetic aperture imaging.
Ground penetrating radar
Transmit and receive electronics, timing, and data capture for subsurface imaging.
Real-time operating systems
Deterministic firmware: scheduling, drivers, board support, and timing you can verify.
Flight systems
Electronics and embedded software for flight, with the assurance and documentation flight programs require.
Avionics sensors
Sensor electronics, interfaces, and data conditioning for airborne use.
Inertial position sensors
Inertial measurement and position sensing: sensor integration, calibration, and data fusion.

How the work runs

Every stage of NRE, under one team.

Take the whole path, or bring us in for the stage you need.

  1. 01

    Hardware and RF

    Architecture, component selection, schematic capture, PCB layout, and antenna and RF design.

  2. 02

    Firmware and FPGA

    Bare metal and real-time firmware, drivers, Xilinx FPGA logic, and signal processing.

  3. 03

    Certification support

    Test planning and lab coordination for FCC, PTCRB, GCF, and carrier approval.

  4. 04

    Prototype to production

    Prototype builds, bring-up and test, design for manufacture, and handoff to your contract manufacturer.

Platforms

We design around parts you can source and support.

Product and company names are trademarks of their owners. Listing them describes the parts we design with and does not imply a partnership or endorsement.

Processors
ARM, Texas Instruments, Qualcomm
FPGA
Xilinx
Cellular and wireless modules
Telit, SIMCom, Quectel, Qualcomm
Connectors and interconnect
Amphenol

Regulated work

Flight and defense programs, handled accordingly.

Avionics assurance

Experience with DO-178C for airborne software and DO-254 for airborne electronic hardware, including the planning and evidence those standards expect.

Export control

We can handle your ITAR and EAR export-controlled work. Tell us up front, and we'll settle how technical data is handled before any of it is shared.

US-person staffing

Restricted work is staffed with US persons only. Our nearshore engineers don't work on it.

After the design

The NRE ends. The device's life doesn't.

Modules reach end of life. Carriers retire networks. Firmware needs updates long after the design team has moved on. Owning systems after the build is the core of our agency, so the team that designed your device can stay with it.

See all services
  • After-build ownership. Firmware maintenance, documentation, and planning for component and module end of life.
  • Change management. Every hardware and firmware change assessed, tested, released, and recorded, including what it means for your certifications.
  • Break-fix. When devices fail in the field and the original designers are gone, we stabilize first, then find the real cause.

Commercial terms

Built for how established companies buy.

Enterprise service agreement

One master agreement covers terms, confidentiality, security, and IP. It's negotiated once, so new work starts without restarting legal review.

Flexible scopes of work

Each application, project, or service level gets its own statement of work. Add, change, or retire scopes as your portfolio changes.

An invoiceable relationship

Monthly invoices on standard terms, purchase-order friendly, with itemized reporting your finance team can reconcile. Vendor onboarding and security reviews welcome.

No lock-in: your code, your infrastructure, your documentation. Everything is built so you could hand it to someone else.

Questions

Common questions

Who actually does the work?

I lead every engagement personally and I'm responsible for the outcome: I set direction, make the calls, and stay in the work. You're consulted on decisions and informed at every step. Our engineers provide the design depth and capacity, and restricted work is staffed with US persons only.

Can you take on one part of a design?

Yes. We can work on the whole device or a single stage, such as firmware, an FPGA design, or the certification path, alongside your own team.

Can you take over an existing design?

Yes. Taking ownership of systems other people built is the core of our agency. We start by reviewing what exists and telling you plainly what we'd keep and what we'd change.

Do you manufacture?

We build prototypes and prepare the design for manufacture, then hand off to your contract manufacturer and support them through production.

Can you guarantee certification?

No one honestly can, because labs and certifying bodies make those decisions. We design with the requirements in mind from the start, plan the testing, and manage the process with you.

How is NRE scoped?

Each stage gets its own statement of work under one enterprise service agreement, so you can start with a defined piece of work and add to it as the design matures.

Tell us what you're building.

Two quick steps. I'll read it personally and reply with an honest read on your design and whether our team can help, usually within one business day.

  • I lead every engagement personally
  • No sales sequences, and your details are only used to reply

Prefer email? [email protected]

Please don't send export-controlled or classified technical data through this form or by email. Tell us the work is restricted, and we'll agree how to handle it first.

Step 1 of 2

Which sounds most like you?
What do you need? Pick any that apply
Where is the design today?
Is any of this export-controlled?
Timeline
Where should I reply?